Thank you!
We will contact you shortly.
Replace an old bathtub with a tiled walk-in shower that is easier to step into and built to last. We build a custom concrete shower base, waterproof it with the Schluter system and can add a low curb, grab bars and a bench. Serving Metro Vancouver and the Fraser Valley.
No more climbing over the side of a tub. A low curb, or no curb where the floor allows it, makes daily showers simpler for every member of the family.
Taking out the tub opens up the room. A tiled shower with a niche, a bench and clean tile lines makes a small bathroom look bigger. For ideas, see bathroom design trends for 2026.
We don't use plastic trays for tiled showers. Every one gets a custom concrete base sloped to the drain and a full waterproofing membrane behind the tile. Read why we build custom concrete shower bases.
From bare studs to finished tile, the same in-house crew handles every step.
Send a few photos of your bathroom. We check the drain location, floor structure, plumbing and walls, then talk through curb height, tile, niche, bench and safety features.
We remove the tub, old tile and backer board down to the studs and check the framing and subfloor for hidden water damage or mould.
We update the shower valve and move plumbing where needed, straighten the walls and add solid blocking for grab bars. Niches and benches are framed at this stage.
The base is built from dry-pack mortar with a precise slope to the drain, with a standard curb, a low curb or a curbless entry where the floor allows.
Kerdi membrane goes over the walls and base, with Kerdi-Band on every seam and the drain sealed into the system. We check every seam before tile goes on. See a Schluter shower base installation, step by step.
We plan the layout, set the tile, grout and silicone every change of plane, then install fixtures and safety features and clean up.
Planning a shower for an older parent, or a bathroom that stays easy to use for years? These are options we can build into your new shower. They are installation options, not a medical or accessibility certification.
We add blocking inside the wall before tile goes on, so grab bars can be fastened to solid backing exactly where you want them.
Not ready for a full renovation? We also install grab bars in existing bathrooms, often together with other small fixes in one visit.
A lower step into the shower, or a curbless entry where the floor structure and drain allow it. We'll tell you honestly what your floor can take.
A tiled bench framed and waterproofed together with the rest of the shower, so you can sit while you wash.
A tiled niche in the wall keeps shampoo and soap within easy reach, without bending down or reaching across the shower.
Small mosaic tile on the shower floor adds grout lines and grip underfoot, and we can help you choose tile with a slip-resistant finish.
For over 15 years our in-house crew has handled bathroom and tile work, painting and full home renovations across the region. Registered in BC, WorkSafeBC covered and insured.
We follow each manufacturer's instructions and use their matching corners, bands and drains, not a mix of leftover parts. Every seam is checked before tile goes on.
We protect the surrounding area, control dust and clean up when we're done. You get an itemized written quote and updates throughout the job.
Taking out the tub and old tile, and repairing any framing or subfloor damage we find behind it.
Moving the drain or valve, or changing the drain type, adds work. A permit may be needed depending on the work and your city.
A standard curb is the simplest. A low curb or curbless entry can mean more work on the floor and the drain.
Shower size, tile choice and extras such as a niche, bench and grab bars.
Straight answers to common questions about walk-in showers and tub-to-shower conversions.
In most bathrooms, yes. The tub space is usually a good size for a shower. We check the drain position, floor structure and plumbing first, then recommend the curb height and layout.
Not always. It depends on the floor structure and where the drain can go. When curbless isn't practical, a low curb still makes stepping in much easier.
Not for tiled showers. We build a custom concrete base with a slope to the drain and waterproof it with the Schluter system or RedGard. For a tile-free option, ask us about a shower kit.
Yes. We install grab bars in existing bathrooms as well as new showers. In a new shower we add blocking inside the wall before tile, so the bars go exactly where you need them.
It depends on the work and your municipality. Moving plumbing may need a permit; replacing tile usually doesn't. We'll tell you during the estimate what is likely to apply.
That's fine. We can retile and waterproof the tub surround, or refinish a tub that has no cracks so it looks new again.
Experience the benefits without any commitment.